Concox / Jimi IoT GPS trackers on gTrack
Connect 89 Concox / Jimi IoT models to gTrack’s tracking platform. Use your existing hardware for live location, trip history and alerts. Choose your model below for its connection guide.
Concox / Jimi IoT models supported by gTrack
Set the port of your model in the tracker, with the server address your account shows.
Server address: tracker.uplisoft.com. Enter the port separately in your tracker configuration.
What gTrack reads from your Concox / Jimi IoT trackers
Built from Jimi IoT’s own protocol documents, so the alarms, sensors and camera events of these trackers arrive in gTrack with their real meaning.
Every Jimi alarm, by name
More than 170 alarm and event codes from Jimi IoT’s documentation: SOS, tow, wire cut, door, airbag, rollover, jamming, fuel theft and more. Each one is named in gTrack and ready for rules and notifications.
Dashcams with ADAS and DMS
JC181, JC182, JC371, JC450, JC451 and JC270: forward collision, lane departure and headway warnings, fatigue, phone use, smoking and distraction alerts, with the alarm photos.
Live video and photos
Dashcam channels live over JT/T 1078, and photos the camera takes on an event or on request, next to the vehicle’s position.
Bluetooth sensors
VL502, VL533 and VG502 report Bluetooth temperature, humidity, door and light sensors and fuel level probes, with their battery level.
Fuel level and fuel cut
Ultrasonic and capacitive fuel level sensors, refuel and fuel theft alerts, and remote fuel or power cut with its confirmation.
Driver identification
Driver card login and logout, unauthorized card alerts and face recognition events from the cabin camera.
Theft and tamper alerts
Tow, tamper, cover removed, SIM removed, GPS and 4G jamming, and unauthorized ignition, as soon as the tracker reports them.
Driving behaviour
Harsh acceleration, braking and cornering, sudden lane change, collision and rollover, driving time and idling.
Your Concox / Jimi IoT tracker on the map in four steps
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
What you get with your Concox / Jimi IoT tracker
Questions and answers
Do I need to buy a Concox / Jimi IoT tracker from gTrack?
No. gTrack is tracking software. Connect a compatible Concox / Jimi IoT device you already own; we do not sell the hardware.
Which port does a Concox / Jimi IoT tracker use on gTrack?
Each model’s port is in the table on this page. Your account shows the server address when you add the vehicle.
Will my Concox / Jimi IoT tracker work?
gTrack connects to the listed models through the gt06, JT/T 808 (jt808), gt02 protocols. Firmware and enabled device features can differ. Check your exact model and connection settings before configuring it.
What do I get once it is connected?
Live tracking on the web and in the mobile app, trip history, alerts, reports, geofences and, where the tracker reports them, fuel and sensor data.
Connect your Concox / Jimi IoT trackers
Keep your existing devices and use gTrack for live fleet tracking, history and alerts.