Cellocator GPS trackers on gTrack
Connect 12 Cellocator models to gTrack’s tracking platform. Use your existing hardware for live location, trip history and alerts. Choose your model below for its connection guide.
Cellocator models supported by gTrack
Set the port of your model in the tracker, with the server address your account shows.
Server address: tracker.uplisoft.com. Enter the port separately in your tracker configuration.
| Model | Protocol | Server port | Connection | Setup |
|---|---|---|---|---|
| Cellocator Cello-CANiQ | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator Cello-F | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator Cello-IQ | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator Cello-R | cellocator | 5033 | TCP / UDP | Connection guide |
| CelloTrack | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator 370-50 | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator Compact CAN | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator Compact Fleet | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator Compact Security | cellocator | 5033 | TCP / UDP | Connection guide |
| Other Cellocator models | cellocator | 5033 | TCP / UDP | Connection guide |
| Cellocator Nano | cellocator | 5033 | TCP / UDP | Connection guide |
| CelloTrack Power 8M | cellocator | 5033 | TCP / UDP | Connection guide |
Your Cellocator tracker on the map in four steps
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
What you get with your Cellocator tracker
Questions and answers
Do I need to buy a Cellocator tracker from gTrack?
No. gTrack is tracking software. Connect a compatible Cellocator device you already own; we do not sell the hardware.
Which port does a Cellocator tracker use on gTrack?
Port 5033. Your account shows the server address when you add the vehicle.
Will my Cellocator tracker work?
gTrack connects to the listed models through the cellocator protocol. Firmware and enabled device features can differ. Check your exact model and connection settings before configuring it.
What do I get once it is connected?
Live tracking on the web and in the mobile app, trip history, alerts, reports, geofences and, where the tracker reports them, fuel and sensor data.
Connect your Cellocator trackers
Keep your existing devices and use gTrack for live fleet tracking, history and alerts.