Cellocator 370-50 GPS tracking setup
Connect your Cellocator 370-50 to gTrack on the cellocator protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
Cellocator 370-50 server and port
| Tracker model | Cellocator 370-50 |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5033 |
| Transport | TCP / UDP |
| Protocol | cellocator |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add Cellocator 370-50 to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Cellocator 370-50 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Cellocator 370-50 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Cellocator models or read the platform setup guide.
Other Cellocator models on cellocator
Cellocator Cello-CANiQ · Cellocator Cello-F · Cellocator Cello-IQ · Cellocator Cello-R · CelloTrack · Cellocator Compact CAN · Cellocator Compact Fleet · Cellocator Compact Security
Questions and answers
Which server and port does the 370-50 use with gTrack?
Server tracker.uplisoft.com, port 5033, TCP / UDP, cellocator protocol.
Do I need to buy the 370-50 from gTrack?
No. gTrack is tracking software: connect the 370-50 you already have.