Teltonika FMC125 GPS tracking setup
Connect your Teltonika FMC125, an advanced vehicle tracker with extra inputs and outputs, to gTrack on the teltonika protocol. This page lists its server settings, the SMS command and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
About the FMC125
The FMC125 is an advanced vehicle tracker with extra inputs and outputs by Teltonika. Specifications, manuals and firmware: official FMC125 documentation.
Teltonika FMC125 server and port
| Tracker model | Teltonika FMC125 |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 11445 |
| Transport | TCP / UDP |
| Protocol | teltonika |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Set the FMC125 to send to gTrack
- Open Teltonika Configurator and connect the FMC125 with a USB cable or Bluetooth.
- In GPRS, set the APN of your SIM card.
- Under Server settings: Domain
tracker.uplisoft.com, Port11445, ProtocolTCP. - Save the configuration to the device. The first position arrives within a few minutes.
Or by SMS. Send this to the tracker's phone number, with two spaces first when its SMS login and password are empty, and your APN in place of <APN>:
setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0
Add Teltonika FMC125 to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Teltonika FMC125 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Teltonika FMC125 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Teltonika models or read the platform setup guide.
Other Teltonika advanced trackers
Teltonika FMB120 · Teltonika FMB122 · Teltonika FMB125 · Teltonika FMB130 · Teltonika FMB140 · Teltonika FMB150 · Teltonika FMC130 · Teltonika FMC150
Questions and answers
Which server and port does the FMC125 use with gTrack?
Server tracker.uplisoft.com, port 11445, TCP / UDP, teltonika protocol.
Can I set the FMC125 by SMS?
Yes. Send "setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0" to the tracker, with two spaces before it when the SMS login and password are empty, and your APN in place of <APN>.
Do I need to buy the FMC125 from gTrack?
No. gTrack is tracking software: connect the FMC125 you already have.