gTrack
PlatformLive GPS trackingTrip history & playbackAlerts & event rulesReportsGeofencesFuel & sensorsDrivers & behaviourFleet maintenanceVideo telematicsRemote commandsMobile appAI gTrack assistantAPI & integrations
SolutionsTransport & logisticsDelivery & courierConstruction & machineryTaxi & passenger transportCorporate fleetsCar rentalCold chainPublic sector & utilities
DevicesPricing
ResourcesGetting startedFAQSecurity & privacyPartners & resellers
CompanyAbout gTrackContact & quotePrivacy policyTerms of service
Request a quote
Teltonika connection guide

Teltonika FMB130 GPS tracking setup

Connect your Teltonika FMB130, an advanced vehicle tracker with extra inputs and outputs, to gTrack on the teltonika protocol. This page lists its server settings, the SMS command and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.

About this model

About the FMB130

The FMB130 is an advanced vehicle tracker with extra inputs and outputs by Teltonika. gTrack reads 631 different values from it, listed below. Specifications, manuals and firmware: official FMB130 documentation.

Connection settings

Teltonika FMB130 server and port

Tracker modelTeltonika FMB130
Server / hostnametracker.uplisoft.com
Port11445
TransportTCP / UDP
Protocolteltonika

Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.

Configure the tracker

Set the FMB130 to send to gTrack

  1. Open Teltonika Configurator and connect the FMB130 with a USB cable or Bluetooth.
  2. In GPRS, set the APN of your SIM card.
  3. Under Server settings: Domain tracker.uplisoft.com, Port 11445, Protocol TCP.
  4. Save the configuration to the device. The first position arrives within a few minutes.

Or by SMS. Send this to the tracker's phone number, with two spaces first when its SMS login and password are empty, and your APN in place of <APN>:

  setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0
Data in gTrack

What gTrack reads from the FMB130

631 values of the FMB130, ready for the live map, reports, rules and notifications.

  • Digital inputs (3): Digital Input 1, Digital Input 2, Digital Input 3
  • Digital outputs (3): Digital Output 1, Digital Output 2, Digital Output 3
  • Analog inputs (2): Analog Input 2, Analog Input 1
  • Vehicle CAN data (47): CAN300 Vehicle Speed, CAN300 Acc Pedal Position, CAN300 Total Fuel Used, CAN300 Fuel Level Liters and more
  • OBD-II data (36): OBD Engine Load, OBD Engine Coolant Temperature, OBD Short Term Fuel Trim 1, OBD Fuel Pressure and more
  • Bluetooth sensors (93): BLE Battery Voltage Percent 2, BLE Battery Voltage Percent 3, BLE Battery Voltage Percent 4, BLE Temperature Extended 1 and more
  • 1-Wire temperature (8): Dallas Temperature ID 4, Dallas Temperature 1, Dallas Temperature 2, Dallas Temperature 3 and more
  • Fuel level sensors (5): LLSFuel Level 1, LLSFuel Level 2, LLSFuel Level 3, LLSFuel Level 4 and more
  • Tachograph (7): Tachograph Total Vehicle Distance, Tachograph Vehicle Speed, Tacho Driver Card Presence, Driver Card License Type and more
  • Driver identification (2): IButton Extended, RFID Extended
  • Driving behaviour (22): Pulse Counter Din 1, Pulse Counter Din 2, Eco Score, Green Driving Event Duration and more
  • Power and battery (9): External Voltage, Battery Voltage, Battery Current, Battery Level and more
  • GNSS and GSM (12): ICCID1, Fuel Used GPS, ICCID2, Gsm Signal Strength and more
  • Other values (382)
Setup

Add Teltonika FMB130 to your fleet

  1. Add the vehicle

    In gTrack click + Asset, give it a name and choose the tracker model.

  2. Enter the identifier

    Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.

  3. Set the server

    Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.

  4. Drive

    The first position appears as soon as the tracker connects — usually within minutes.

In the tracker form, choose Teltonika FMB130 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.

Check the connection

From the first packet to the live map

Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.

Once Teltonika FMB130 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.

Compare other Teltonika models or read the platform setup guide.

FAQ

Questions and answers

Which server and port does the FMB130 use with gTrack?

Server tracker.uplisoft.com, port 11445, TCP / UDP, teltonika protocol.

Can I set the FMB130 by SMS?

Yes. Send "setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0" to the tracker, with two spaces before it when the SMS login and password are empty, and your APN in place of <APN>.

What data does gTrack read from the FMB130?

631 values: digital inputs, digital outputs, analog inputs, vehicle can data, obd-ii data, bluetooth sensors, 1-wire temperature, fuel level sensors, tachograph, driver identification, driving behaviour, power and battery, gnss and gsm.

Do I need to buy the FMB130 from gTrack?

No. gTrack is tracking software: connect the FMB130 you already have.