Teltonika FMB641 GPS tracking setup
Connect your Teltonika FMB641, a professional tracker for trucks and heavy machinery, to gTrack on the teltonika protocol. This page lists its server settings, the SMS command and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
About the FMB641
The FMB641 is a professional tracker for trucks and heavy machinery by Teltonika. gTrack reads 757 different values from it, listed below. Specifications, manuals and firmware: official FMB641 documentation.
Teltonika FMB641 server and port
| Tracker model | Teltonika FMB641 |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 11445 |
| Transport | TCP / UDP |
| Protocol | teltonika |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Set the FMB641 to send to gTrack
- Open Teltonika Configurator and connect the FMB641 with a USB cable or Bluetooth.
- In GPRS, set the APN of your SIM card.
- Under Server settings: Domain
tracker.uplisoft.com, Port11445, ProtocolTCP. - Save the configuration to the device. The first position arrives within a few minutes.
Or by SMS. Send this to the tracker's phone number, with two spaces first when its SMS login and password are empty, and your APN in place of <APN>:
setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0
What gTrack reads from the FMB641
757 values of the FMB641, ready for the live map, reports, rules and notifications.
- Digital inputs (4): Digital Input 1, Digital Input 2, Digital Input 3, Digital Input 4
- Digital outputs (4): Digital Output 3, Digital Output 4, Digital Output 1, Digital Output 2
- Analog inputs (4): Analog Input 1, Analog Input 2, Analog Input 3, Analog Input 4
- Vehicle CAN data (73): CAN300 Program Number, CAN300 Module ID, CAN300 Engine Work Time, CAN300 Engine Work Time Counted and more
- Bluetooth sensors (5): BLE LLS Fuel 1, BLE LLS Fuel 2, BLE LLS Fuel 3, BLE LLS Fuel 4 and more
- 1-Wire temperature (18): Dallas Temperature ID 5, Dallas Temperature 5, Dallas Temperature ID 6, Dallas Temperature 6 and more
- Tachograph (8): Tacho Data Source, Tacho Drive No Card, Tachograph Performance, Tachograph Vehicle In Motion and more
- Driver identification (3): IButton Extended, RFID Extended, RFID COM2 Extended
- Driving behaviour (32): Number Of Records, Idling, Crash Detection, Geofence Zone Over Speeding and more
- Power and battery (24): Power Supply Voltage Extended, Battery Voltage, Battery Current, Battery Temperature and more
- GNSS and GSM (7): Gsm Signal Strength, GNSSstatus, PDOP, HDOP and more
- Other values (575)
Add Teltonika FMB641 to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Teltonika FMB641 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Teltonika FMB641 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Teltonika models or read the platform setup guide.
Other Teltonika professional trackers
Teltonika FMB630 · Teltonika FMB640 · Teltonika FMC640 · Teltonika FMC650 · Teltonika FMM640 · Teltonika FMM650
Questions and answers
Which server and port does the FMB641 use with gTrack?
Server tracker.uplisoft.com, port 11445, TCP / UDP, teltonika protocol.
Can I set the FMB641 by SMS?
Yes. Send "setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0" to the tracker, with two spaces before it when the SMS login and password are empty, and your APN in place of <APN>.
What data does gTrack read from the FMB641?
757 values: digital inputs, digital outputs, analog inputs, vehicle can data, bluetooth sensors, 1-wire temperature, tachograph, driver identification, driving behaviour, power and battery, gnss and gsm.
Do I need to buy the FMB641 from gTrack?
No. gTrack is tracking software: connect the FMB641 you already have.