Joint JT701D GPS tracking setup
Connect your Joint JT701D to gTrack on the jt600 protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
Joint JT701D server and port
| Tracker model | Joint JT701D |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5014 |
| Transport | TCP |
| Protocol | jt600 |
Enter the hostname without https:// and keep the port in its separate setting. Select TCP in your tracker configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add Joint JT701D to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Joint JT701D and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Joint JT701D sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Joint models or read the platform setup guide.
Other Joint models on jt600
Joint GP5000 · Joint JT600C · Joint JT600 · Joint JT701 · Joint JT702 · Joint JT705A · Joint JT707 · Joint JT707A
Questions and answers
Which server and port does the JT701D use with gTrack?
Server tracker.uplisoft.com, port 5014, TCP, jt600 protocol.
Do I need to buy the JT701D from gTrack?
No. gTrack is tracking software: connect the JT701D you already have.