GoSafe G71 GPS tracking setup
Connect your GoSafe G71 to gTrack on the gosafe protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
GoSafe G71 server and port
| Tracker model | GoSafe G71 |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5078 |
| Transport | TCP / UDP |
| Protocol | gosafe |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add GoSafe G71 to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose GoSafe G71 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once GoSafe G71 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other GoSafe models or read the platform setup guide.
Other GoSafe models on gosafe
GoSafe AT17 · GoSafe AT19 · GoSafe G1C · GoSafe G1S · GoSafe G3C · GoSafe G3S · GoSafe G606 · GoSafe G616
Questions and answers
Which server and port does the G71 use with gTrack?
Server tracker.uplisoft.com, port 5078, TCP / UDP, gosafe protocol.
Do I need to buy the G71 from gTrack?
No. gTrack is tracking software: connect the G71 you already have.