gTrack
PlatformLive GPS trackingTrip history & playbackAlerts & event rulesReportsGeofencesFuel & sensorsDrivers & behaviourFleet maintenanceVideo telematicsRemote commandsMobile appAI gTrack assistantAPI & integrations
SolutionsTransport & logisticsDelivery & courierConstruction & machineryTaxi & passenger transportCorporate fleetsCar rentalCold chainPublic sector & utilities
DevicesPricing
ResourcesGetting startedFAQSecurity & privacyPartners & resellers
CompanyAbout gTrackContact & quotePrivacy policyTerms of service
Request a quote
Compatible devices

GoSafe GPS trackers on gTrack

Connect 26 GoSafe models to gTrack’s tracking platform. Use your existing hardware for live location, trip history and alerts. Choose your model below for its connection guide.

Models

GoSafe models supported by gTrack

Set the port of your model in the tracker, with the server address your account shows.

Server address: tracker.uplisoft.com. Enter the port separately in your tracker configuration.

ModelProtocolServer portConnectionSetup
GoSafe AT17gosafe5078TCP / UDPConnection guide
GoSafe AT19gosafe5078TCP / UDPConnection guide
GoSafe G1Cgosafe5078TCP / UDPConnection guide
GoSafe G1Sgosafe5078TCP / UDPConnection guide
GoSafe G3Cgosafe5078TCP / UDPConnection guide
GoSafe G3Sgosafe5078TCP / UDPConnection guide
GoSafe G606gosafe5078TCP / UDPConnection guide
GoSafe G616gosafe5078TCP / UDPConnection guide
GoSafe G626gosafe5078TCP / UDPConnection guide
GoSafe G6Cgosafe5078TCP / UDPConnection guide
GoSafe G6Sgosafe5078TCP / UDPConnection guide
GoSafe G71gosafe5078TCP / UDPConnection guide
GoSafe G737gosafe5078TCP / UDPConnection guide
GoSafe G777gosafe5078TCP / UDPConnection guide
GoSafe G78gosafe5078TCP / UDPConnection guide
GoSafe G797gosafe5078TCP / UDPConnection guide
GoSafe G797Wgosafe5078TCP / UDPConnection guide
GoSafe G79Bgosafe5078TCP / UDPConnection guide
GoSafe G7Sgosafe5078TCP / UDPConnection guide
GoSafe G828gosafe5078TCP / UDPConnection guide
GoSafe G91Igosafe5078TCP / UDPConnection guide
GoSafe G91Sh025013TCP / UDPConnection guide
GoSafe G92gosafe5078TCP / UDPConnection guide
GoSafe G959gosafe5078TCP / UDPConnection guide
Other GoSafe modelsgosafe5078TCP / UDPConnection guide
GoSafe V90gosafe5078TCP / UDPConnection guide
Connect a tracker

Your GoSafe tracker on the map in four steps

  1. Add the vehicle

    In gTrack click + Asset, give it a name and choose the tracker model.

  2. Enter the identifier

    Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.

  3. Set the server

    Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.

  4. Drive

    The first position appears as soon as the tracker connects — usually within minutes.

FAQ

Questions and answers

Do I need to buy a GoSafe tracker from gTrack?

No. gTrack is tracking software. Connect a compatible GoSafe device you already own; we do not sell the hardware.

Which port does a GoSafe tracker use on gTrack?

Each model’s port is in the table on this page. Your account shows the server address when you add the vehicle.

Will my GoSafe tracker work?

gTrack connects to the listed models through the gosafe, h02 protocols. Firmware and enabled device features can differ. Check your exact model and connection settings before configuring it.

What do I get once it is connected?

Live tracking on the web and in the mobile app, trip history, alerts, reports, geofences and, where the tracker reports them, fuel and sensor data.

Connect your GoSafe trackers

Keep your existing devices and use gTrack for live fleet tracking, history and alerts.