GenX GPS trackers on gTrack
Connect 2 GenX models to gTrack’s tracking platform. Use your existing hardware for live location, trip history and alerts. Choose your model below for its connection guide.
GenX models supported by gTrack
Set the port of your model in the tracker, with the server address your account shows.
Server address: tracker.uplisoft.com. Enter the port separately in your tracker configuration.
| Model | Protocol | Server port | Connection | Setup |
|---|---|---|---|---|
| GenX 20 | genx | 5148 | TCP | Connection guide |
| GenX 5P | genx | 5148 | TCP | Connection guide |
Your GenX tracker on the map in four steps
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
What you get with your GenX tracker
Questions and answers
Do I need to buy a GenX tracker from gTrack?
No. gTrack is tracking software. Connect a compatible GenX device you already own; we do not sell the hardware.
Which port does a GenX tracker use on gTrack?
Port 5148. Your account shows the server address when you add the vehicle.
Will my GenX tracker work?
gTrack connects to the listed models through the genx protocol. Firmware and enabled device features can differ. Check your exact model and connection settings before configuring it.
What do I get once it is connected?
Live tracking on the web and in the mobile app, trip history, alerts, reports, geofences and, where the tracker reports them, fuel and sensor data.
Connect your GenX trackers
Keep your existing devices and use gTrack for live fleet tracking, history and alerts.