Teltonika FMB001 GPS tracking setup
Connect your Teltonika FMB001, an OBD-II plug-and-play tracker, to gTrack on the teltonika protocol. This page lists its server settings, the SMS command and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
About the FMB001
The FMB001 is an OBD-II plug-and-play tracker by Teltonika. gTrack reads 319 different values from it, listed below. Specifications, manuals and firmware: official FMB001 documentation.
Teltonika FMB001 server and port
| Tracker model | Teltonika FMB001 |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 11445 |
| Transport | TCP / UDP |
| Protocol | teltonika |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Set the FMB001 to send to gTrack
- Open Teltonika Configurator and connect the FMB001 with a USB cable or Bluetooth.
- In GPRS, set the APN of your SIM card.
- Under Server settings: Domain
tracker.uplisoft.com, Port11445, ProtocolTCP. - Save the configuration to the device. The first position arrives within a few minutes.
Or by SMS. Send this to the tracker's phone number, with two spaces first when its SMS login and password are empty, and your APN in place of <APN>:
setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0
What gTrack reads from the FMB001
319 values of the FMB001, ready for the live map, reports, rules and notifications.
- Digital inputs (4): Digital Input 1, Digital Input 2, Digital Input 3, DIN2 AIN2 Spec Event
- Digital outputs (3): Digital Output 1, Digital Output 2, Digital Output 3
- Analog inputs (2): Analog Input 2, Analog Input 1
- Vehicle CAN data (45): CAN300 Vehicle Speed, CAN300 Acc Pedal Position, CAN300 Fuel Consumed, CAN300 Fuel Level Liters and more
- OBD-II data (30): OBD Engine Load, OBD Engine Coolant Temperature, OBD Short Term Fuel Trim 1, OBD Fuel Pressure and more
- Bluetooth sensors (42): BLE Battery Voltage Percent 2, BLE Battery Voltage Percent 3, BLE Battery Voltage Percent 4, BLE Temperature Extended 1 and more
- 1-Wire temperature (8): Dallas Temperature ID 4, Dallas Temperature 1, Dallas Temperature 2, Dallas Temperature 3 and more
- Fuel level sensors (13): LLSFuel Level 1, LLSFuel Level 2, LLSFuel Level 3, LLSFuel Level 4 and more
- Tachograph (7): Tachograph Total Vehicle Distance, Tachograph Vehicle Speed, Tacho Driver Card Presence, Driver Card License Type and more
- Driver identification (3): Authorized IButton, IButton Extended, RFID Extended
- Driving behaviour (15): Pulse Counter Din 1, Pulse Counter Din 2, Eco Score, Green Driving Event Duration and more
- Power and battery (6): External Voltage, Battery Voltage, Battery Current, Battery Level and more
- GNSS and GSM (10): ICCID1, Fuel Used GPS, ICCID2, Gsm Signal Strength and more
- Other values (131)
Add Teltonika FMB001 to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Teltonika FMB001 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Teltonika FMB001 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Teltonika models or read the platform setup guide.
Other Teltonika OBD-II trackers
Teltonika FMB002 · Teltonika FMB003 · Teltonika FMC001 · Teltonika FMC003 · Teltonika FMM001 · Teltonika FMM003
Questions and answers
Which server and port does the FMB001 use with gTrack?
Server tracker.uplisoft.com, port 11445, TCP / UDP, teltonika protocol.
Can I set the FMB001 by SMS?
Yes. Send "setparam 2001:<APN>;2004:tracker.uplisoft.com;2005:11445;2006:0" to the tracker, with two spaces before it when the SMS login and password are empty, and your APN in place of <APN>.
What data does gTrack read from the FMB001?
319 values: digital inputs, digital outputs, analog inputs, vehicle can data, obd-ii data, bluetooth sensors, 1-wire temperature, fuel level sensors, tachograph, driver identification, driving behaviour, power and battery, gnss and gsm.
Do I need to buy the FMB001 from gTrack?
No. gTrack is tracking software: connect the FMB001 you already have.