Suntech ST600M GPS tracking setup
Connect your Suntech ST600M to gTrack on the suntech protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
Suntech ST600M server and port
| Tracker model | Suntech ST600M |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5011 |
| Transport | TCP |
| Protocol | suntech |
Enter the hostname without https:// and keep the port in its separate setting. Select TCP in your tracker configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add Suntech ST600M to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Suntech ST600M and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Suntech ST600M sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Suntech models or read the platform setup guide.
Other Suntech models on suntech
Suntech ST200 · Suntech ST20 · Suntech ST210 · Suntech ST215 · Suntech ST230 · Suntech ST240 · Suntech ST300 · Suntech ST310U
Questions and answers
Which server and port does the ST600M use with gTrack?
Server tracker.uplisoft.com, port 5011, TCP, suntech protocol.
Do I need to buy the ST600M from gTrack?
No. gTrack is tracking software: connect the ST600M you already have.