gTrack
PlatformLive GPS trackingTrip history & playbackAlerts & event rulesReportsGeofencesFuel & sensorsDrivers & behaviourFleet maintenanceVideo telematicsRemote commandsMobile appAI gTrack assistantAPI & integrations
SolutionsTransport & logisticsDelivery & courierConstruction & machineryTaxi & passenger transportCorporate fleetsCar rentalCold chainPublic sector & utilities
DevicesPricing
ResourcesGetting startedFAQSecurity & privacyPartners & resellers
CompanyAbout gTrackContact & quotePrivacy policyTerms of service
Request a quote
Sanav connection guide

Sanav QG-201 GPS tracking setup

Connect your Sanav QG-201 to gTrack on the sanav protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.

Connection settings

Sanav QG-201 server and port

Tracker modelSanav QG-201
Server / hostnametracker.uplisoft.com
Port5051
TransportTCP / UDP
Protocolsanav

Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.

Setup

Add Sanav QG-201 to your fleet

  1. Add the vehicle

    In gTrack click + Asset, give it a name and choose the tracker model.

  2. Enter the identifier

    Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.

  3. Set the server

    Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.

  4. Drive

    The first position appears as soon as the tracker connects — usually within minutes.

In the tracker form, choose Sanav QG-201 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.

Check the connection

From the first packet to the live map

Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.

Once Sanav QG-201 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.

Compare other Sanav models or read the platform setup guide.

Similar models

Other Sanav models on sanav

Sanav CT-24 · Sanav CT-58A · Sanav CT-58 · Sanav GC-101 · Sanav GS-818 · Sanav GS-819 · Sanav GX-101 · Sanav MT-101

FAQ

Questions and answers

Which server and port does the QG-201 use with gTrack?

Server tracker.uplisoft.com, port 5051, TCP / UDP, sanav protocol.

Do I need to buy the QG-201 from gTrack?

No. gTrack is tracking software: connect the QG-201 you already have.