Queclink GL601CEU GPS tracking setup
Connect your Queclink GL601CEU to gTrack on the gl200 protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
Queclink GL601CEU server and port
| Tracker model | Queclink GL601CEU |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5004 |
| Transport | TCP / UDP |
| Protocol | gl200 |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add Queclink GL601CEU to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Queclink GL601CEU and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Queclink GL601CEU sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Queclink models or read the platform setup guide.
Other Queclink models on gl200
Queclink CK300 · Queclink CV200 · Queclink CV5000 · Queclink GB100 · Queclink GB100CG · Queclink GB100MG · Queclink GB130MG · Queclink GES100CG
Questions and answers
Which server and port does the GL601CEU use with gTrack?
Server tracker.uplisoft.com, port 5004, TCP / UDP, gl200 protocol.
Do I need to buy the GL601CEU from gTrack?
No. gTrack is tracking software: connect the GL601CEU you already have.