gTrack
PlatformLive GPS trackingTrip history & playbackAlerts & event rulesReportsGeofencesFuel & sensorsDrivers & behaviourFleet maintenanceVideo telematicsRemote commandsMobile appAI gTrack assistantAPI & integrations
SolutionsTransport & logisticsDelivery & courierConstruction & machineryTaxi & passenger transportCorporate fleetsCar rentalCold chainPublic sector & utilities
DevicesPricing
ResourcesGetting startedFAQSecurity & privacyPartners & resellers
CompanyAbout gTrackContact & quotePrivacy policyTerms of service
Request a quote
Howen connection guide

Howen Mobile DVR GPS tracking setup

Connect your Howen Mobile DVR to gTrack on the JT/T 808 (jt808) protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.

Connection settings

Howen Mobile DVR server and port

Tracker modelHowen Mobile DVR
Server / hostnametracker.uplisoft.com
Port5015
TransportTCP
ProtocolJT/T 808 (jt808)

Enter the hostname without https:// and keep the port in its separate setting. Select TCP in your tracker configuration. Use the APN supplied by your SIM provider and check that mobile data is available.

Data in gTrack

What gTrack reads from the Mobile DVR

  • Position: location, speed, heading, satellites, odometer
  • Status: ignition, inputs, external and battery voltage, GSM signal
  • Alarms the tracker reports, each by name, and its sensor values where it has them
Setup

Add Howen Mobile DVR to your fleet

  1. Add the vehicle

    In gTrack click + Asset, give it a name and choose the tracker model.

  2. Enter the identifier

    Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.

  3. Set the server

    Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.

  4. Drive

    The first position appears as soon as the tracker connects — usually within minutes.

In the tracker form, choose Howen Mobile DVR and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.

Check the connection

From the first packet to the live map

Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.

Once Howen Mobile DVR sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.

Compare other Howen models or read the platform setup guide.

FAQ

Questions and answers

Which server and port does the Mobile DVR use with gTrack?

Server tracker.uplisoft.com, port 5015, TCP, JT/T 808 (jt808) protocol.

Do I need to buy the Mobile DVR from gTrack?

No. gTrack is tracking software: connect the Mobile DVR you already have.