gTrack
PlatformLive GPS trackingTrip history & playbackAlerts & event rulesReportsGeofencesFuel & sensorsDrivers & behaviourFleet maintenanceVideo telematicsRemote commandsMobile appAI gTrack assistantAPI & integrations
SolutionsTransport & logisticsDelivery & courierConstruction & machineryTaxi & passenger transportCorporate fleetsCar rentalCold chainPublic sector & utilities
DevicesPricing
ResourcesGetting startedFAQSecurity & privacyPartners & resellers
CompanyAbout gTrackContact & quotePrivacy policyTerms of service
Request a quote
ExtremTrac connection guide

ExtremTrac ET800E GPS tracking setup

Connect your ExtremTrac ET800E to gTrack on the extremtrac protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.

Connection settings

ExtremTrac ET800E server and port

Tracker modelExtremTrac ET800E
Server / hostnametracker.uplisoft.com
Port5126
TransportTCP
Protocolextremtrac

Enter the hostname without https:// and keep the port in its separate setting. Select TCP in your tracker configuration. Use the APN supplied by your SIM provider and check that mobile data is available.

Setup

Add ExtremTrac ET800E to your fleet

  1. Add the vehicle

    In gTrack click + Asset, give it a name and choose the tracker model.

  2. Enter the identifier

    Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.

  3. Set the server

    Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.

  4. Drive

    The first position appears as soon as the tracker connects — usually within minutes.

In the tracker form, choose ExtremTrac ET800E and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.

Check the connection

From the first packet to the live map

Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.

Once ExtremTrac ET800E sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.

Compare other ExtremTrac models or read the platform setup guide.

Similar models

Other ExtremTrac models on extremtrac

ExtremTrac MC300 · ExtremTrac Mini ET700 · ExtremTrac WT10

FAQ

Questions and answers

Which server and port does the ET800E use with gTrack?

Server tracker.uplisoft.com, port 5126, TCP, extremtrac protocol.

Do I need to buy the ET800E from gTrack?

No. gTrack is tracking software: connect the ET800E you already have.