Enfora GSM2218 GPS tracking setup
Connect your Enfora GSM2218 to gTrack on the enfora protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
Enfora GSM2218 server and port
| Tracker model | Enfora GSM2218 |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5008 |
| Transport | TCP / UDP |
| Protocol | enfora |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add Enfora GSM2218 to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Enfora GSM2218 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Enfora GSM2218 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Enfora models or read the platform setup guide.
Other Enfora models on enfora
Enfora GSM2208 · Enfora GSM2338 · Enfora MT3000 · Enfora MT4000
Questions and answers
Which server and port does the GSM2218 use with gTrack?
Server tracker.uplisoft.com, port 5008, TCP / UDP, enfora protocol.
Do I need to buy the GSM2218 from gTrack?
No. gTrack is tracking software: connect the GSM2218 you already have.