ATrack AL11 GPS tracking setup
Connect your ATrack AL11 to gTrack on the atrack protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
ATrack AL11 server and port
| Tracker model | ATrack AL11 |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5044 |
| Transport | TCP / UDP |
| Protocol | atrack |
Enter the hostname without https:// and keep the port in its separate setting. Choose TCP or UDP to match your device configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add ATrack AL11 to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose ATrack AL11 and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once ATrack AL11 sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other ATrack models or read the platform setup guide.
Other ATrack models on atrack
ATrack AK1 · ATrack AK7 · ATrack AK7V · ATrack AK11 · ATrack AK300 · ATrack AL1 · ATrack AL7 · ATrack AL300
Questions and answers
Which server and port does the AL11 use with gTrack?
Server tracker.uplisoft.com, port 5044, TCP / UDP, atrack protocol.
Do I need to buy the AL11 from gTrack?
No. gTrack is tracking software: connect the AL11 you already have.