Aplicom A1 + CAN GPS tracking setup
Connect your Aplicom A1 + CAN to gTrack on the aplicom protocol. This page lists its server settings and what gTrack reads from it. gTrack provides tracking software and does not sell trackers.
Aplicom A1 + CAN server and port
| Tracker model | Aplicom A1 + CAN |
|---|---|
| Server / hostname | tracker.uplisoft.com |
| Port | 5049 |
| Transport | TCP |
| Protocol | aplicom |
Enter the hostname without https:// and keep the port in its separate setting. Select TCP in your tracker configuration. Use the APN supplied by your SIM provider and check that mobile data is available.
Add Aplicom A1 + CAN to your fleet
- Add the vehicle
In gTrack click + Asset, give it a name and choose the tracker model.
- Enter the identifier
Use the IMEI or device identifier printed on your tracker. Add its SIM phone number and APN in the tracker form.
- Set the server
Configure your tracker to send to tracker.uplisoft.com using the model’s port and TCP or UDP transport shown below.
- Drive
The first position appears as soon as the tracker connects — usually within minutes.
In the tracker form, choose Aplicom A1 + CAN and enter the identifier exactly as shown on your device. Saving these fields does not remotely reconfigure the tracker: apply the server settings using its manufacturer’s configuration tool or supported SMS commands.
From the first packet to the live map
Open the device Terminal in gTrack to check incoming packets and decoded reports. Confirm the identifier, APN, hostname, port and transport if the device remains offline. A device without a GPS fix may connect before it can show a valid position.
Once Aplicom A1 + CAN sends valid data, use gTrack for live location, trip history, geofences and alerts. Fuel, ignition, temperature and other sensor values depend on the device, its wiring and firmware configuration.
Compare other Aplicom models or read the platform setup guide.
Other Aplicom models on aplicom
Aplicom A11 LTE · Aplicom A1 · Aplicom A1 + CAN + Tacho · Aplicom A9 · Aplicom A9 NEX · Aplicom A9 + CAN
Questions and answers
Which server and port does the A1 + CAN use with gTrack?
Server tracker.uplisoft.com, port 5049, TCP, aplicom protocol.
Do I need to buy the A1 + CAN from gTrack?
No. gTrack is tracking software: connect the A1 + CAN you already have.